Process Optimization
Honeywell launches Unisim Design Suite Release 450
Honeywell Process Solutions launched its UniSim Design Suite Release 450, the newest version of its process modelling software that helps industrial manufacturers increase their engineering effectiveness and optimize their process designs.
Unlock next-level hydrocracker flexibility in today’s turbulent markets
As a critical catalytic conversion unit, the hydrocracker provides refiners with valuable feedstock and product slate flexibility.
Review of the CSB report on the 2010 Tesoro refinery fire
On April 2, 2010, a catastrophic fire occurred within the naphtha hydrotreating unit in the Tesoro refinery in Anacortes, Washington. The final CSB report, including recommendations, was issued in May 2014, more than four years after the incident that resulted in the tragic loss of seven lives. This work critically reviews the CSB analysis of this incident and several of its resulting recommendations.
Utilize genetic programming to develop new point efficiency correlation
Distillation is one of the most used separation operations in the chemical and petroleum industries.
Distillation—Then and now
Distillation is the most often used means to separate two or more components, exploiting the physical properties of different boiling points.
Choose the most appropriate modeling approach for reactors
The efficient operation and design of any reactor depends on the know-how regarding the chemical reaction and the hydrodynamics inside the reactor.
Analyze abnormal operations of an HDS reactor loop with dynamic simulation
Hydrodesulfurization units are used in a petroleum refinery to process a variety of feeds to alter composition via the addition of hydrogen.
Utilize an optimizer to blend gasoline directly to ships
A new control system and single-blend optimization system make it possible to blend gasoline directly into tanker ships for delivery, rather than only into tanks, thereby saving millions in capital and reducing product giveaway.
Syngas from H2S and CO2: An alternative, pioneering synthesis route?
Hydrogen sulfide and carbon dioxide represent major concerns for the hydrocarbon industry. Both species are contaminants and, since their use as feedstock is minor, are considered troubling byproducts.
Secure the best benefits from C4 hydrocarbon processing—Part 1: Separation sequences
Crude C<sub>4</sub> streams from the steam cracker unit or the fluidized catalytic cracker unit contain valuable hydrocarbons, such as butadiene and C<sub>4</sub> olefins.
- Exploring ethanol: Maersk to test 50/50 ethanol-methanol bunker fuel 12/8
- BASF introduces low-VOC polyurethane catalyst Lupragen® N 208 12/8
- Idemitsu Kosan to be first Japanese refiner to supply biofuels to shipping industry 12/8
- China refiner moves forward with expansion despite sanctions 12/8
- Air Products and Yara to partner on low-emission ammonia projects 12/8
- Opinion: G7’s Russian oil tanker ban shows teeth, but bite is in doubt 12/8
