Hydrogen
Reduce dry gas and coke with a more flexible FCC technology
To meet increasingly stringent specifications for cleaner gasoline and to produce more clean fluid catalytic cracking (FCC) naphtha with lower olefins, a novel FCC technologya for maximizing isoparaffins was developed in the late 1990s. The technology’s principal is based on the formation and conversion of olefins in two different reaction zones.
Hydrocarbon Processing Awards
<i>Hydrocarbon Processing</i>, the downstream processing sector’s leading technical publication, has announced the finalists for its second annual awards.
Upgrading the bottom of the barrel
In the past few decades, new technologies, including both carbon rejection methods and catalytic conversion methods, have emerged.
Dynamic simulation of integrated syngas, O2 and steam networks for a gasification complex—Part 1
Reliance Industries Ltd. (RIL) operates the world’s largest refinery complex, with a combined crude processing capacity of 1.24 MMbpd that is split between two refineries: a Domestic Tariff Area (DTA) refinery and a Special Economic Zone (SEZ) refinery in Jamnagar, India.
Advancing export terminal technology: An optimized process for the refrigeration of cryogenic hydrocarbons
Ethane production in North America (NA) has expanded dramatically with the onset of shale production and associated hydraulic fracturing. Ethane concentrations in fractured shale gas are typically 10% or higher vs. a traditional range of 4%–7% in associated gas.
Continuous catalytic regeneration reformer optimization: A result of change in mindset
In today’s industrial environment, where refiners are struggling to improve gross refinery margins, around-the-clock process optimization is a must.
Convert the heaviest fraction of the barrel into valuable products
A proprietary slurry technology<sup>a</sup> represents an innovation in residue conversion and unconventional oil upgrading, and marks a step change in the treatment of the heavy end of the barrel.
Optimization: Filtration for processes inside refineries
Proper filtration is one of the most important functions performed inside refineries.
Heavy crude oil processing design and reliability
Revamping refineries to process heavier crude slates goes well beyond the requirements to meet equipment performance dictated by a shift in the quantity of lighter product yields to heavier products.
Optimize a refinery H2 network using spreadsheet tools
One of the major goals in every refining complex is to minimize the utilization of its hydrogen (H<sub>2</sub>) generation units by maximizing the H<sub>2</sub> recovery from residual streams.
- Hanwha Ocean signs strategic MoU with Kanata Clean Power for proposed $15.7-B, 12-MMtpy FLNG project in Canada 6/18
- Burckhardt Compression secures milestone order for first industrial scale liquefied CO₂ carrier supporting Northern Lights CCS project 6/18
- Dynelectro dispatches 250-kW electrolyzer unit to Syntholene’s Iceland eSAF project 6/18
- EIA: U.S. crude inventories decline for tenth week to over 40-yr low 6/18
- Australia opens first carbon refinery, making new products from captured CO2 6/18
- ABB expands non-invasive sensing portfolio to advance simpler, safer temperature measurement 6/18
