Reactors
Industry Pioneers: Polymer science, catalytic cracking, petrochemicals and EPC
Waldo Semon was an American chemist whose detour with assigned laboratory research at B. F. Goodrich led to the development of vinyl—the second best-selling plastic in the world.
How hydroprocessing feed filtration system design impacts process reliability and efficiency
Oil refining is an exceptionally complex industry, with much of the inherent complexity stemming from wide regional variances in crude quality and composition, plant capabilities and the types of products produced.
Industry Pioneers: Polymer science, catalytic cracking and chemical advances
The Austrian-born chemist, Hermann Francis Mark, is well-known for his contributions to the development of polymer science, which he devoted more than 60 yr of his life to.
Impact of biofeed retrofits, co-processing on refinery amine units, SWSs and SRUs—Part 2
Producing diesel with a portion of biologically sourced carbon is being done at an increasing number of conventional crude oil refineries.
HP Flashback: Operations, processes and safety evolve and advance: Excerpts from the 1930s
The following is a mixture of technical articles, columns and headlines published in the 1930s by <i>The Refiner and Natural Gasoline Manufacturer</i>, the forerunner to <i>Hydrocarbon Processing</i>.
Debottlenecking of an extractive distillation column for aromatics recovery: Effect of feed pre-vaporization
Extractive distillation is one of the most efficient techniques to separate aromatic and non-aromatic hydrocarbons by increasing the relative volatility of the mixture in the presence of a solvent.
History of the HPI: The 1930s: Catalytic cracking, polyethylene, synthetic fibers, resins and jet engines
The hydrocarbon processing industry (HPI) has a rich history of discovery, challenges, breakthroughs, trial and error, collaboration and success. <i>Hydrocarbon Processing</i> continues its reflection on the history of the HPI.
Web-based software for predicting crude compatibility and optimization for increasing heavy oil processing
Refineries in oil-importing nations typically process a blend of crude oils, rather than a single crude oil, to ensure that an optimum product mix can be obtained at the minimum costs.
Impact of biofeed retrofits, coprocessing on refinery amine units, SWSs and SRUs—Part 1
Diesel with a portion of biologically sourced carbon is being produced at an increasing number of conventional crude oil refineries.
HP Flashback: Advancing processing technologies and refining operations: Excerpts from the 1920s
The following is a mixture of technical articles, columns and headlines published in the 1920s by <i>The Refiner and Natural Gasoline Manufacturer</i>, the forerunner to <i>Hydrocarbon Processing</i>.
- ExxonMobil plans 1 Blbs/yr of advanced recycling by 2027 11/22
- Gauging the likely Trump effect on U.S. energy and power sectors 11/22
- Russia's Lukoil restoring cracker at NORSI refinery, gasoline output rising 11/22
- Nigeria's local currency crude sales fall short of target, Dangote refinery says 11/22
- U.S. October gasoline imports hit post-pandemic low on slump in European shipments 11/22
- Clean Hydrogen Works awards McDermott FEED contract for Ascension Clean Energy (ACE) project 11/21
