Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Maintenance & Reliability

Mitigate corrosion in your crude unit

Nalco Company, Energy Services Division: Hilton, N. P.

Real-time analyzers can provide improved monitoring of chloride levels and enable better corrosion control practices

Case history 58: Piston pin plug wear

Consulting Engineer: Sofronas, A.

A wear analysis can help when failure data are meager

Calculating the temperature distribution in horizontal vessel saddle supports

The heat-transfer theory of cooling fins is applied

Spiral-wound or kammprofile gaskets?

Chevron Richmond Refinery: Reeves, D. W.
Garlock Sealing Technologies: Yoder, C.

There appears to be a shift toward the latter, but the choice isn’t always clear. Here’s where best to apply each type.

HP Reliability: Eccentric reducers and straight runs of pipe at pump suction

Hydrocarbon Processing Staff: Bloch, Heinz P.

Questions relating to proper reducer application in centrifugal pump suction lines date back many decades. Until his death (at age 84, in 1995), world-renowned pump expert Igor Karassik frequently cor..

Prevent electric erosion in variable-frequency drive bearings

Hydrocarbon Processing Staff: Bloch, Heinz P.

Here are the reasons and remedial actions

Valve design reduces costs and increases safety for US refineries

Flowserve Flow Control Division: Johnson, R. D.  |  Lee, B.

The goals were achieved by using alloys with superior corrosion resistance

How the inertia number points to compressor system design challenges

SNC-Lavalin Inc.: Ajdari, I.  |  Kapadia, M.  |  Tellez-Schmill, R.

It facilitates predicting compressor system performance

Pump aftermarket offers solutions for abrasive services

Sulzer Pumps (US) Inc. Service Center Houston: McPherson, S.

Upgrades substantially increased MTBR

HP Reliability: Consider bearing protection for small steam turbines

Hydrocarbon Processing Staff: Bloch, Heinz P.  |  Thinnes, Billy

In most small machines there is a need to limit both contaminant ingress and oil leakage. Inexpensive lip seals are sometimes used for sealing at the bearing housing, but lip seals typically last only..