Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining
HomeAuthorsTunca, O.

Tunca, O.

Tüpraş, Kocaeli, Turkey

Ozan Tunca is a Process Engineer, responsible for monitoring, troubleshooting and optimizing Prime G+ and FCC units in Tupras’ Izmit refinery. Previously, he worked as a process safety engineer in the oil and gas and petrochemical industries. He earned a BS degree in chemical engineering from Yildiz Technical University.

Izmit FCCU revamp

Hydrocarbon Processing / January 2024
Tüpraş: Genç, M.  |  Kantar, B. O.  |  Önen, M. F.  |  Tunca, O.
Process Optimization / Refining / Reactors / Naphtha / Hydrocracking / Equipment

Tüpraş utilizes proprietary fluid catalytic cracking units<sup>a</sup> (FCCUs) at its Izmit and Izmir refineries. The Izmit unit was designed in 1968 and started up in 1972 with a side-by-side style reactor/regenerator.

FCC and HDS feed flexibility and integration with the delayed coker in the Izmit refinery

Hydrocarbon Processing / June 2023
Tüpraş: Kantar, B. O.  |  Tunca, O.  |  Azizoğlu, Z.  |  Önen, M. F.  |  Genç, M.
Process Optimization / Refining / Engineering & Design / Equipment / Gasoline / Hydrotreating / Loss Prevention / Naphtha / Natural Gas / Sulfur / Treating / Europe

Operational flexibility is one of the key parameters that leads to success and sustainability in refinery production.

  • 1
  • ... 1 pages