Pumps
Improve metering pump reliability through maintenance training
While equipment reliability is not a new concept in hydrocarbon processing facilities, it is increasingly becoming the top priority for plant managers. Plant managers realize that operational efficiency is far from being a passing trend, and is closely linked to the quality and reliability of the equipment used.
Reliability: Troubleshoot hot bearings in hot pumps
The reliability engineering unit supervisor (REUS) working at a 400-Mbpd refinery wrote that he was greatly concerned about a bearing temperature excursion. He realized that certain rules of thumb had been handed down to his maintenance employees, and that not all of these conveyed the same numbers and guidance.
ReTPac concept from MAN Diesel & Turbo recaptures market for refinery applications
Tailored specifically to the requirements of refinery operators, the modular and scalable turbomachinery concept combines centrifugal compressor and prime mover to a single-lift unit, serving refinery applications like hydrotreating and hydrocracking.
Codes and Standards: Overcome technical difficulties in field pumps ordered to API 610/ISO 13709
The continued objective of this column series is to increase awareness of code requirements, interpretations and limitations as they stand today, and the options available to engineers for “alternative engineering.”
Amarinth delivers API 610 VS4 pumps for STAR refinery in Turkey
Amarinth has delivered its first order of exotic alloy API 610 VS4 pumps for use in the STAR in Turkey.
Reliability: Consider amended warranties for rotating equipment
If you have ever encountered a situation where an equipment manufacturer declined to offer warranties, allow us to share three case histories.
Innovations
Petron Bataan Refinery (PBR) is the largest integrated crude oil refinery and petrochemicals complex in the Philippines.
Innovations
Planned shutdowns, turnarounds and outages (STOs) are often scheduled for preventive maintenance and new equipment installation that must be performed to keep a plant running and in regulatory compliance.
Design a pressure safety valve at the centrifugal pump discharge
In most process plants, it is unusual to install a pressure safety valve (PSV) to centrifugal pump and compressor discharge, but some PSVs are needed and are installed to protect the system against miscellaneous scenarios that could create overpressure in the system.
Reliability: Transform ODR-OPPM into a worthwhile initiative
ODR, which stands for operator-driven reliability, has recently morphed into a new arrangement of letters: OPPM.
- ExxonMobil plans 1 Blbs/yr of advanced recycling by 2027 11/22
- Gauging the likely Trump effect on U.S. energy and power sectors 11/22
- Russia's Lukoil restoring cracker at NORSI refinery, gasoline output rising 11/22
- Nigeria's local currency crude sales fall short of target, Dangote refinery says 11/22
- U.S. October gasoline imports hit post-pandemic low on slump in European shipments 11/22
- Clean Hydrogen Works awards McDermott FEED contract for Ascension Clean Energy (ACE) project 11/21
