Engineering & Design
Cenovus refinery in Ohio (U.S.), plans to shut multiple units for 6 weeks for maintenance
Cenovus will begin planned maintenance work on multiple units at its 160,000-bpd refinery in Toledo, Ohio in mid April.
INEOS Enterprises completes the sale of INEOS Composites to KPS Capital Partners for €1.7 B
INEOS Enterprises has completed the sale of its composites business to KPS Capital Partners for approximately €1.7 B. The composites business is a global leader in producing resins and gelcoats that are used to make strong, lightweight composite plastics found in everything from cars and boats to buildings and electronics.
Refractory lining reliability challenges in hydrogen-fueled process fired heaters
This article provides an overview of the potential impact of H2-rich fuel firing on refractory integrity and suggests safeguards to mitigate challenges. While this article discusses refractory issues in process fired heaters, the information presented can be broadly applicable to fired equipment where a flame is present.
Methods for increasing the heat transfer rate on steam condensation surfaces
Traditional systems rely on filmwise condensation for heat transfer; however, for large energy consumers, dropwise condensation will help improve heat transfer efficiency and reduce steam consumption and carbon footprint. This can be achieved through water treatment technologies—specifically the dropwise condensation technology—that help facilities increase productivity and reliability while reducing energy consumption.
Scaling pyrolysis: A critical step toward plastic circularity
Pyrolysis has potential to process hard-to-recycle plastics and expand the scope of recycling, but scaling up pyrolysis to meet global demand remains a significant challenge. From technical optimization to creating market confidence, addressing these barriers is essential if pyrolysis is to reduce plastic pollution and advance circularity.
Willis Sustainable Fuels selects FT CANS to boost sustainable aviation fuel production in the UK
Johnson Matthey announced that Willis Sustainable Fuels (WSF) has selected JM and bp’s award-winning Fischer Tropsch CANS™ technology for WSF’s sustainable aviation fuel project in Teesside, Northeast England.
Uganda signs deal with UAE investment firm over 60,000-bpd oil refinery
Uganda signed an oil refinery agreement with UAE-based Alpha MBM Investments for a 60% stake in a crude oil refinery in Kabaale, Hoima District.
Optimize direct air carbon capture systems for petrochemical sustainability
The advent of direct air carbon capture (DACC) systems presents a groundbreaking opportunity to capture carbon dioxide (CO2) and repurpose it as a valuable feedstock for petrochemical products like methanol and synthetic fuels.
LLDPE/HDPE swing technology platform
This article highlights and compares the various technology platforms available to provide technical insight into the selection of the best LLDPE/HDPE platform for a given facility. A high-level overview of the various technology platforms is provided based on open-source available data and the authors’ years of technical and operating experience.
Minimize risks and unlock profitability with opportunity crudes
This article focuses on new digital technologies that enable refiners to extract the most profit out of opportunity crudes.
- Carbon capture tops agenda at GPAE Conference 2025 6/17
- INEOS to cease phenol production at German site, cites high European energy costs and CO2 tax policy 6/17
- Petrobras signs $892 MM in contracts to complete RNEST Train 2 refinery expansion 6/17
- China's May refinery throughput at 9-month low on plant overhauls (1) 6/17
- bp completes turnaround work at 250,000-bpd refinery in Washington (U.S.) 6/17
- Japan's Eneos restarts 77,000-bpd Kawasaki CDU after unplanned shutdown 6/17
