Refining
Continuous monitoring of creep in equipment
In this article, the development of a customized program—designed by the author and used at Raffineria di Milazzo—for the continuous monitoring of creep in vessels and piping is explained.
Oil refinery/petrochemical integration in a CO2-constrained world—Part 2
Petrochemical demand will increase with gross domestic product, while the demand for motor fuels will only show modest growth and may even decline in certain regions, given environmental/legislative pressures and the introduction of battery-powered electric vehicles.
Prospects of petrochemical disruptive technology applications in Egypt Energy Hub Project
One of the most important challenges facing the Egyptian economy is the growing demand for petrochemicals in different sectors, particularly plastic materials and composites.
Aromatic complex: A case study for relief load estimation of a heat integrated refinery unit
Refineries are moving from fuels to chemical production as the demand for fuel derived from crude oil declines in the near future.
MAA refinery—Bunker fuel oil challenge: Stable and compatible VLSFO production
Studies have been conducted on strategies for bunker fuel oil (BFO) production with reduced sulfur and catalytic fines concentration limits.
PSV sizing: An alternative solution to the homogeneous direct-integration method
Pressure safety valves (PSVs) are designed to protect personnel and plant properties from an overpressure occurrence in equipment or piping by relieving fluid to a safe location.
Dual-mechanical seal arrangement for hot pump service
Selecting mechanical seals for hot services in an oil refinery or petrochemical plant is always a challenging task—and it is a task that needs careful attention, since the wrong seal selection can have a significant impact on pump reliability and availability.
Keeping fugitive emissions costs down with low-E valves
Fugitive emissions have become an increasingly critical area of interest for chemical processing and refining facilities.
Case study: Reliability of low-flow, high-head pumps
Pumps are one of the key elements used in different industries, including oil and gas, petrochemicals and water treatment.
Online treatment of a slide valve fault in an FCCU
The regeneration slide valve is a key piece of equipment that controls the ratio of catalyst to oil and reaction temperature in FCC units (FCCUs).
- ADNOC, AIQ developing first-of-a-kind agentic AI solution for global energy transformation 11/4
- SEEC to use thyssenkrupp nucera’s electrolyzer for caustic soda production 11/4
- Oman's OQ to list up to 49% stake in methanol, ammonia and LPG arm 11/4
- U.S. exports of ethane and ethane-based petrochemicals rose 135% from 2014 to 2023 11/4
- Cannon Artes breaks ground on massive industrial wastewater treatment/water reuse plant in Qatar 11/4
- LyondellBasell to close Houston refinery (U.S.) in Q1 2025 11/4
