Maintenance & Reliability
Crude unit at Tupras's Izmir oil refinery expected to restart mid-December
A 151,000-bpd crude unit at the Izmir oil refinery operated by Turkey's Tupras is tentatively expected to restart in mid-December after a fire on Nov. 25.
Taiwan's Formosa operates refinery at reduced rate due to maintenance
Taiwan's Formosa Petrochemical Corp. is operating its refinery at a reduced rate of 410,000 bpd due to maintenance at its delayed coker unit (DCU) this month.
Australia's Ampol ends Lytton refinery repairs, provides output forecast
Australia's top fuel retailer Ampol said on Friday it had completed repairs at its fluidized catalytic cracking unit (FCCU) at the Lytton refinery in Queensland, and now expects total production for 2024 to be 5.2 B liters (l).
Russian oil refinery runs in Nov. up 6% m/m
Russian refinery oil processing volumes in November are up by 6% versus October to 22.1 MM tonnes (5.4 MMbpd).
Reduce costs by following grab sampling best practices
Accurate grab sampling practices are necessary to validate the quality of chemical products with precise compositions. Operators must follow proper procedures to avoid compromising the sample. Otherwise, the result may be an inaccurate analysis of their product, leading to quality lapses and potentially costing a facility thousands of dollars in revenue.
Improving ammonia production sustainability
While approximately 70% of ammonia production is used to make fertilizers, it is also identified as the largest carbon dioxide (CO2)-emitting chemical industry process. This article examines several novel technologies to improve the sustainability of the ammonia production process.
Safe design and operation of burn pit flare systems
This article will mainly focus on horizontal flare systems and grade-level burn pits. Design considerations, operational challenges and several lessons learned will be discussed.
SMR feed effluent hairpin exchanger: Once upon a time—An unusual thermal mix-point failure—Part 2
This article presents a review of a failure that happened in a hairpin heat exchanger type on the shell side in a H2 (H2) reformer unit.
Use advanced thermal insulative coatings to improve safety, maintain access and protect against corrosion
Throughout refineries, petrochemical plants and offshore oil and gas platforms, personnel are often required to work near equipment that operates at high temperatures. Protecting those workers from skin-contact burns has typically involved two approaches: implementing physical barriers and covering the hot assets with insulation and cladding. This article details how thermal insulative coatings can be used to improve safety and guard against corrosion.
Russian Urals oil sales to Turkey in Nov. up 38% m/m as STAR refinery increases runs
Russian Urals oil supplies to Turkey's ports in November increased to 9.9 MMbbl from 7.4 MMbbl in October as its main consumer was back from outage.
- NAPCOR releases 2024 PET recycling report highlighting system efficiency gains and continued strength of PET circularity 12/12
- OQ courts other partners for petrochemical complex in Oman as SABIC drops out 12/12
- Brazil's BNDES approves $71 MM for carbon storage project 12/12
- Cuba on edge as U.S. seizure of oil tanker puts supply at risk 12/12
- China oil demand to plateau between 2025 and 2030 12/12
- Germany's PCK refinery says no impact from pipeline leak 12/12
