Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Distillation

bp delays Whiting refinery (U.S.) restart from maintenance

bp has delayed the restart of a crude distillation unit and a coker at its 435,000-bpd Whiting, Indiana, refinery from maintenance.

DG Fuels to build $5-B, 193-MMgpy SAF facility in Minnesota (U.S.)

DG Fuels announced the selection of a site for a roughly $5-B manufacturing facility in Moorhead, Minnesota, that will produce 193 MMgpy of low-carbon aviation fuel (SAF) using agricultural and wood waste as feedstock.

Shell Catalysts & Technologies, Licella to develop global low-carbon biomass-to-biofuel commercial solutions

Shell Catalysts & Technologies and Licella have formed a new upgrading technology collaboration to develop a low-carbon, integrated solution for converting biomass into advanced biofuels. This initiative aims to unlock a new value chain for the production of low-carbon fuels, addressing growing global demand for sustainable energy solutions, including sustainable aviation fuel.

ADNOC, AIQ developing first-of-a-kind agentic AI solution for global energy transformation

ENERGYai will combine large language model technology with cutting-edge ‘agentic’ AI – AI ‘agents’ that are trained in specific tasks across ADNOC’s value chain. These specialized AI agents bring a new level of autonomy and precision to critical tasks, from seismic analysis to energy efficiency and real-time process monitoring.

LyondellBasell to close Houston refinery (U.S.) in Q1 2025

Chemical maker LyondellBasell Industries detailed its long-announced plan to permanently shutter its 263,776-bpd  Houston oil refinery in the first quarter of 2025, shutting the facility's CDU and coker train in January, followed by the shuttering of the second CDU-coker production train, which supplies the gasoline-producing FCC and ancillary units, ending motor fuel production

Best practice guidelines for selecting types of compressors

Technip Energies: Kanikar, S.

This article discusses the best practices for selecting compressors for different applications in refining, petrochemical, chemical and carbon capture plants.

Utilize a process simulation digital twin to optimize condensate yield

ADNOC Sour Gas: Kaleem, J.  |  Al Ali, E.  |  Allanaboyina, V.  |  Srinivas, R.
Aspen Technology: E. Gebesy  |  S. Sheikh

With the aim to maximize profit, and contribute to sustainability targets by reducing greenhouse gas emissions, ADNOC Sour Gas has optimized condensate hydrotreater operation by adjusting Reid vapor pressure, which resulted in maximizing condensate yield. This article is a case study on using a process digital twin to optimize condensate yield.

Thermal decomposition of particulate mercury sulfides in petroleum—Part 2

Chevron Energy Technology Co.: Hatakeyama, E.  |  Das, T.  |  Hoelen, T. P.
Contributing Author: O'Rear, D.

Traces of particulate mercury sulfide (HgS) in stabilized crude oils transform to elemental mercury below 400°C in refinery distillation units. The authors evaluated this transformation and measured reaction rates and activation energies in crude oil and Hg-spiked mineral oil, using glass vessels at atmospheric pressure and a microunit at 1,000 psig.

Singapore distillates stocks slip to below 9 MMbbl

Singapore's middle distillates stocks fell for the third straight week to below 9 MMbbl as gains in net exports of jet fuel offset a drop in gasoil exports.

Russia's idle oil refining capacity revised up 10% for October

Russia plans to take offline 4.4 MM tonnes of refining capacity in October, an increase of 10% from an earlier plan, increasing the amount of crude oil available for export.