Asia/Pacific
HP Water Management: Consider software tools for water reuse projects
The hydrocarbon processing industry needs reliable and economic sources of water for present and future operations. Ensuring a sustainable water supply requires a focused effort to evaluate the qualit..
Update hydrocracking reactor controls for improved reliability
The industry consultant believes auto-quench, excursion control and bed-outlet layers should join auto-depressure as industry-best practice for all hydrocrackers.
Use a systematized approach of good practices in pygas hydrogenation via APC
APC with inferential modeling was successfully applied to pygas hydrogenation units. The lengthening of the catalyst run length limits downtime for both the pygas unit and upstream units such as the steam cracker.
Why don’t we properly train control engineers?
While there are managers in the process industry that see training control engineers as a “no-brainer,” these are very much in the minority. They may send staff on courses covering configura..
Consider automated fault detection systems to improve facility reliability
Automated fault detection and diagnosis systems (AFDDSs) are well established in many consumer and industrial sectors.1 The conventional limit-value based (high/low alarms) fault detection and diagnos..
Optimize desulfurization of gasoline via advanced process control techniques
This case history describes the development of the inferential models used in open-loop and closed-loop applications, laboratory and analyzer update mechanisms, and APC model generation.
Maximize diesel production in an FCC-centered refinery, Part 2
Part two of this series focuses on the selection of FCC catalysts, methods for hydroprocessing light cycle oil (LCO) and the production of diesel fuel from FCC byproducts.
Optimize sulfur recovery in dilute H2S sources
The new direct oxidation process is an economic method for sulfur recovery from low-H2S content gases, converting H2S in a gas catalytic process directly to elemental sulfur.
Identify and control excess air from process heaters
Process heaters are the largest consumers of energy in most plants. A refinery, on average, burns approximately 2 billion Btu/hr of fuel in fired heaters. The total quantity of fuel burned (heat relea..
Apply new pump-drive software to test performance
Process control schemes involving fluid-flow machinery with traditional adjustable speed drives (ASDs) or modules encounter limitations such as control flexibility and accuracy. In this context, the t..
- Kumho Mitsui Chemicals to increase capacity of MDI production facilities 12/15
- ABS, Eneos, NYK Line and Seacor Holdings launch joint study to develop a methanol marine fuel supply network in the U.S. 12/15
- ENEOS accelerates AI-driven materials discovery of immersion cooling fluids and novel catalysts Using NVIDIA ALCHEMI 12/15
- SAMSUNG E&A wins FEED contract for nearly $5-B SAF plant in the U.S. 12/15
- KBR wins green ammonia project by IGNIS in Spain 12/15
- Phillips 66 announces $2.4-B capital budget for 2026 12/15
