Boost capacity of SRUs with mixing devices for oxygen enrichment
The requirement for additional sulfur recovery unit capacity in a refinery may stem from hydroprocessing operations; a refinery expansion project; a shift from lighter to heavier, sourer crudes to improve margins; or the need to remove extra sulfur content to meet tighter environmental regulations.
IP: 3.145.151.7
This is a preview of our premium content. Thank you for your interest—please
log in or
subscribe to read the full article.
The Authors
Rajasekhar, M. - Engineers India Ltd., New Delhi, India
M. Rajasekhar is a post-graduate student in chemical engineering from IIT Roorkee, with more than four years of experience in CFD and energy efficiency improvement studies for refineries and petrochemical plants. He works as a senior engineer at EIL.
Thakare, V. D. - Engineers India Ltd., New Delhi, India
V. D. Thakare is a post-graduate student in chemical engineering from the National Institute of Technology at Surat. He works as an engineer at EIL. He is actively involved with CFD simulations, both for research on new technologies and troubleshooting operational problems in refinery equipment.
Srivardhan, G. - Engineers India Ltd., New Delhi, India
G. Srivardhan is a post-graduate student in chemical engineering from IIT Kanpur. He works as a senior engineer at EIL. He has more than six years of experience in CFD projects and energy efficiency improvement studies for refineries and petrochemical plants.
Jayanti, V. K. - Engineers India Ltd., New Delhi, India
V. Kamesh Jayanti is deputy manager at the R&D division of EIL. He joined EIL in 2006 after completing his MTech degree in chemical engineering from the Indian Institute of Technology (IIT) at Kharagpur. He has more than seven years of experience in design, adequacy checking for revamp projects, commissioning and troubleshooting in SRU, TGTU, ARU and O2 enrichment technology for capacity enhancement of the SRU.
Nambiar, D. K. R. - Engineers India Ltd., New Delhi, India
D. K. R. Nambiar is assistant general manager in the R&D division of EIL. Dr. Nambiar is a graduate of the Indian Institute of Technology at Bombay, with a PhD from the Indian Institute of Science in Bangalore. At EIL, he has been associated with the establishment of a CFD facility at the R&D center in Gurgaon. The facility is used to execute projects for both in-house and external clients.
Singh, S. R. - Engineers India Ltd., New Delhi, India
Sheo Raj Singh is a graduate in chemical engineering from IIT Kanpur. He joined EIL in 1981 and holds the position of head of R&D. During his long association with EIL, he has been involved in developing and implementing several process technologies and computational tools to improve the design and operation of industrial processes.
Shukla, V. - Engineers India Ltd., New Delhi, India
Vartika Shukla is an executive director with Engineers India Ltd. (EIL), leading its research and development (R&D) division. She joined EIL after graduating in chemical engineering from IIT Kanpur in 1988, and was the head of EIL’s process division before her current assignment. She has more than 26 years of consulting experience in the process design of refinery, gas processing and petrochemical units.
Related Articles
From the Archive
Comments