Heat Exchanger
TransTech and Metalforms complete acquisition of Koch Heat Transfer's assets
TransTech Group has completed the acquisition of Koch Heat Transfer’s international assets and intellectual property through its subsidiary, Metalforms LLC. The transaction includes Koch Heat Transfer’s European assets and global rights to its proprietary BROWN FINTUBE® Products and TWISTED TUBE® Heat Exchanger Technologies.
ClearSign Technologies debuts new ClearSign Core M Series process burner technology
ClearSign Technologies Corporation announced that following the installation of a new burner technology into the Texas Gulf coast facility of a global chemical company, the company is reporting selective catalytic reduction (SCR) level nitrogen oxide (NOx) emissions in addition to high heat transfer efficiency within the heater.
Kelvion Partners in ESCO project to revolutionize supercritical CO₂ systems with 3D-printed heat exchangers
Kelvion, the global leader in heat exchange technology, is proud to partner in the ESCO research project, which aims to optimize sCO₂ cycle technology for industrial applications. As part of this initiative, Kelvion will develop cutting-edge 3D-printed heat exchanger prototypes using advanced materials specifically designed for sCO₂ systems, reaffirming its commitment to driving sustainable energy innovations.
ExxonMobil’s next-generation H2 burner can help decarbonize a key industry
At its olefins plant in Baytown, Texas, ExxonMobil has designed and installed pyrolysis burners that can operate on up to 100% H2 fuel. A total of 44 burners were installed in one of the plant’s steam cracking furnaces.
Alleima to supply Preem with heat exchanger tubes for Lysekil refinery conversion
Alleima will supply Preem with heat exchanger tubes to be used in the conversion of the Lysekil refinery from fossil to renewable fuels.
SMR feed effluent hairpin exchanger: Once upon a time—An unusual thermal mix-point failure—Part 2
This article presents a review of a failure that happened in a hairpin heat exchanger type on the shell side in a H2 (H2) reformer unit.
SMR feed effluent hairpin exchanger: Once upon a time—An unusual thermal mix-point failure—Part 1
This article presents a review of a failure that happened in a hairpin heat exchanger type on the shell side in a hydrogen (H2) reformer unit. This mechanism was not identified during the design phase and led to a failure after only two years of operation. This article also reviews the situations encountered during the design stage and how they affected the material selection.
Iraq's Kerbala refinery to operate at 50% in coming days
Iraq's Kerbala refinery will operate at around 50% capacity in the coming days. The refinery will process around 60,000 bpd as four of its eight heat exchanger units will stay offline for extensive maintenance
Kurita America launches Kurita Dropwise Condensation Technology in North America
Kurita America, part of a leading global provider of industrial water treatment solutions the Kurita Group, has introduced Kurita Dropwise Condensation Technology in the North American marketplace.
Retrofitting CO2 capture in a petroleum refinery
This article examines the application of solvent absorption-based post combustion capture for refinery/site-specific factors and quantifies the impact this will have on CCS CAPEX/OPEX. This analysis helps to determine the optimum approach for any individual refinery site.
- thyssenkrupp Uhde to deliver sustainability and digital services for Brunei Fertilizer Industries 4/10
- TransTech and Metalforms complete acquisition of Koch Heat Transfer's assets 4/10
- Russia lacks infrastructure to replace U.S. LPG for China 4/10
- CF Industries, JERA, Mitsui & Co. form JV for production and offtake of low-carbon ammonia 4/10
- Taiwan's Formosa cuts refinery run rate to 68% on planned maintenance 4/10
- Russia's Far East oil refinery operating at full capacity after fire 4/10
