Innovative approach to accelerating the startup of a gasoline block and associated units at Saudi Aramco’s Jazan refinery complex

Saeed S. AlAlloush is an Engineering Consultant within Saudi Aramco’s Process and Control Systems Department. He has more than 20 yr of experience in the oil refining industry, primarily with the fluid catalytic cracking process. He has also published and presented several papers, and has been granted three U.S.-registered patents. AlAlloush earned an MS degree in chemical engineering from the University of Tulsa in Oklahoma.

is a Operation Engineer within Saudi Aramco’s Jazan Refinery Department, specializing in naphtha block hydroprocessing and reforming units. He is a professional chemical engineer with 12 yr of industry experience, and an active member in international engineering bodies such as Engineers Australia and IChemE, UK. He earned an MS degree in chemical engineering from the University of the Punjab in Lahore, Pakistan, and an MBA degree from Bahauddin Zakariya University in Multan, Pakistan.

is an Operation Engineer within Saudi Aramco’s Jazan Refinery Department, specializing in naphtha hydroprocessing, reforming, and aromatics extraction and processing units. He is a chemical engineer with 10 yr of industrial experience in refining and petrochemicals facilities. Ghadeer earned a BS degree in chemical engineering from King Fahd University of Petroleum and Minerals in Dhahran, Saudi Arabia, and an MS degree in refining and petrochemicals from the IFP School in Rueil-Malmaison, France.

is a Process Engineer within Saudi Aramco’s Process & Control Systems Department, specializing in naphtha hydroprocessing, isomerization and reforming units. He has 6 yr of industrial experience in refining facilities. He earned a BS degree in chemical engineering from King Fahd University of Petroleum and Minerals in Dhahran, Saudi Arabia.

is a Process Engineer within Saudi Aramco’s Process & Control Systems Department, specializing in naphtha hydroprocessing, reforming, isomerization and other processing units. He is a chemical engineer with 5 yr of industrial experience in refining and petrochemicals facilities. He earned a BS degree in chemical engineering, with a concentration in polymer science and engineering, from Michigan State University in East Lansing, Michigan.