Allah, W. K.
Wesam Kahalf Allah is a Pump Engineer at Saudi Aramco. He has 8 yr of experience with the company. He earned a BS degree in mechanical engineering from Purdue University and an MS degree in engineering from Texas A&M University.
Vertically suspended molten sulfur pumping challenges and best practices
The objective of this article is to share industry experience related to the reliability challenges with vertically suspended molten sulfur pumps. Due to the operating temperatures and the unique chemical properties of sulfur, several operational and reliability challenges are inherently present across the industry.
High-pressure water pump mechanical seal failure investigation
To mitigate leakage, mechanical seals are one of the most critical components for centrifugal pumps.
Troubleshooting the repetitive failure and shaft seizure of a hot oil circulation pump
The Shaybah NGL recovery plant has a single-stage, double-suction between bearings, radial-split design for hot oil circulation.
Analyzing axial cooling fans’ high noise, vibration and failures
Shipping pumps with 1,800 hp are equipped with five cooling fans that cool the oil going to the lube oil pumps to lubricate the bearings.
Root cause analysis on bearing failure on an induced draft fan
This case study aims to provide the root cause analysis behind bearing failure of an induced (ID) fan at a new refinery startup in 2015.
- 1
- ... 1 pages
- BASF intends to take over shares in Alsachimie JV from DOMO Chemicals 5/28
- Digital Feature: FuelEU: A growth opportunity for U.S. Midwest ethanol producers 5/28
- ADNOC, TotalEnergies announce national launch of ADNOC Voyager lubricants in Egypt 5/28
- ExxonMobil to sell French subsidiary Esso to Canadian energy group 5/28
- UPM cancels second Rotterdam biomass-to-fuels refinery 5/28
- ExxonMobil ramps up unit at 250,000-bpd refinery in Joliet, Illinois (U.S.) to full capacity 5/28
