Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Compressors

MAN supplies compressor to record air separation project in South Africa

With a production capacity of 5,000 tpd of oxygen, the ultra-modern facility pushes the technical boundaries that have existed up to now, also with regard to efficiency, reliability and safety.

Cameron LNG picks Elliott to supply compressors

When the new liquefaction facility becomes operational in 2018, it will enable bi-directional service between the terminal and the liquefaction plant.

Contain ‘normal’ leakage from primary seals

AESSEAL plc: Smith, R.  |  Shaw, S.

Dry containment seals have gained popularity over the last few decades and provided reliable service. The refinery sector has used this sealing technology to limit fugitive emissions in a cost-effecti..

HP Engineering Case Histories: Case 83: What are useful questions to ask before starting a vibration analysis?

Consulting Engineer: Sofronas, A.

Periodically, this author receives questions from readers throughout the world addressing what performance issues could be wrong with a centrifugal compressor that is vibrating. Note: It is impossible..

Precision Polymer Engineering opens Texas hub

The new site manufactures compression-molded components for the oil and gas industry as well as critical components for semiconductor and heavy equipment applications.

HP News

Qatar Petroleum and Shell cancel $6.5-B petrochemical project in Qatar Royal Dutch Shell and Qatar Petroleum (QP) have canceled the $6.5-B Al-Karaana petrochemical project in Qatar, which will signifi..

Avoid counterproductive project management practices

Hydrocarbon Processing Staff: Bloch, Heinz P.

For many years, reliability-focused engineers have observed flawed procurement processes for mechanical equipment. Many requirements are supposedly aimed at the lowest possible lifecycle cost; however..

Fine-tune monitoring of critical compressors

PROGNOST Systems GmbH: Loeken, J.

In this case history, a new monitoring system was installed on a critical service hyper compressor for a Middle East (ME) ethylene complex. This unit supported two 400 Mton polyethylene (PE) units; do..

Consider technology to reduce compressor vibration and noise problems

Dresser-Rand: Liu, Z.

Industrial centrifugal compressors installed in hydrocarbon processing industry (HPI) complexes absorb significant amounts of mechanical power when compressing gases. A small part of the mechanical en..

Achieve successful compressor startup by addressing dry-gas seal failure

Toyo Engineering Canada Ltd.: Zardynezhad, S.

A common root cause for compressor failure during first startup is a failure of the dry-gas seal (DGS) system. To avoid failures of gas compressors, the project team and end users must understand the importance and significance of the DGS very early in the basic design phase.