Lee, S. H.
Se-Ho Lee is a stationary equipment engineer with SK Energy at the Ulsan complex in South Korea. He has more than four years of petrochemical industry experience, specializing in pressure vessel and flange leak troubleshooting and maintenance. He is credited with major roles and involvement in the development of standard specifications and maintenance procedures of stationary equipment. He graduated with a BS degree in mechanical engineering from Inha University in South Korea.
Application of ring-type joint gaskets in a refinery
In refineries and petrochemical plants, ring-type joint (RTJ) flanges have been applied to high-pressure processes or sensitive areas that are susceptible to leaks.
Determine the standard hoop density of spiral-wound gaskets on flanges
The use of spiral-wound gaskets on flanges has resulted in good sealing performance. However, most gaskets do not perform well when the flange is improperly installed.
- 1
- ... 1 pages
- Syensqo and Axens launch Argylium to accelerate Europe's solid-state battery breakthrough 1/6
- Samsung E&A breaks ground on 500,000-tpy ammonia facility in the U.S. 1/6
- Nova Sustainable Fuels project reaches key milestone with environmental assessment approval 1/6
- VLS Environmental Solutions acquires Merichem's caustic services business 1/6
- Phillips 66 says two U.S. Gulf Coast refineries can process Venezuelan crude 1/6
- Nigeria's Dangote oil refinery says fuel supply intact amid maintenance 1/6
